You will quickly learn:
- Tips to Avoid Ice Buildup
- How to Keep the Compressor Heartbeat Strong?
- Door Sealing Performance Comparison
Let's get started
Contents
Tips to Avoid Ice Buildup
How to Keep the Compressor Heartbeat Strong
Door Sealing Performance Comparison
Tips on how to prevent freezer compartment from freezing
1.Defrost regularly
- Clean the freezer every 3-6 months.
- Unplug the power, open the door, and let the ice melt.
- Use a hair dryer to blow away stubborn ice, but be careful.
2.Arrange food cleverly
- Don't crowd food together, leave gaps for cold air to circulate.
- Separate raw and cooked food, and pack them in fresh-keeping boxes or bags to reduce moisture condensation.
3.Protect the sealing of the door
- Check the door seal frequently to see if it is deformed or damaged.
- Replace it in time if there is a problem to ensure that the "line of defense" is firm.
4.Accurately control the temperature
- Set the temperature at around -18℃, which is suitable for food "hibernation".
- Fine-tune according to the instructions and usage habits to keep the temperature stable.
5.Do not allow hot food to "invade"
- Let hot food "cool down" at room temperature first, and then put it in when the temperature drops.
- Avoid temperature fluctuations to reduce the possibility of freezing.
6.Use dehumidification "guards" cleverly
- Put silica gel desiccant, activated carbon, etc. to absorb moisture.
- Replace regularly to maintain "combat effectiveness".
7.Regular "cleaning sweeps"
- Wipe the inner wall and partitions with a soft cloth or sponge dipped in warm water.
- Clean frost and dirt, then wipe dry to keep it clean.
How to Keep the Compressor Heartbeat Strong？
Reasons for compressor freezing
- Incorrect operating parameters, such as too much refrigerant and too low temperature.
- Frequent starting and stopping, and the temperature fluctuates.
Use the compressor correctly
- Make sure the power supply voltage and ambient temperature are within the specified range.
- Install protective components to reduce failures.
- Control the number and time of starts and stops to avoid frequent starts and stops.
- Check the oil level regularly to keep the oil level normal.
Comparison of freezer door sealing performance of cabinets with the same material
Plastic door cabinets
- Lightweight, cheap, and good sealing.
- It becomes brittle at low temperatures, and the door seal may deform.
Metal door cabinets
- Strong and durable, with strong resistance to deformation.
- Stable sealing at low temperatures, but fast heat conduction, easy to form condensation.
Composite door cabinets
- Combining the advantages of multiple materials, good strength and toughness.
- Good sealing, not easy to deform, moderate thermal conductivity, and reduced condensation.
Glass door cabinets
- Single-layer glass has poor sealing, and cold air is easy to "escape".
- Double-layer tempered glass has good sealing, isolates the outside temperature, and reduces ice formation.